fabcam
03-19-2007, 03:52 PM
Creating Horizontal, Vertical or Linear Dimension.
NOTE: This is a good example of using the "Right Click for Zooming" and the "Reset" command button.
Step 1) Select the "Hoz Dim", "Vert Dim" or the "Linear Dim" command button.
Step 2) Select the 2 "PickPoints" for the dimension.
Step 3) Select a "screen location" (NOT a PickPoint) to lay the text down.
http://www.2020softwaresolutions.com/images/support104.jpg
This is what it will look like once the dimension is completed:
http://www.2020softwaresolutions.com/images/support123.gif
Use the "Shade Mode" command icon for a great picture for printing or saving off for your web site:
http://www.2020softwaresolutions.com/images/support124.gif
NOTE: This is a good example of using the "Right Click for Zooming" and the "Reset" command button.
Step 1) Select the "Hoz Dim", "Vert Dim" or the "Linear Dim" command button.
Step 2) Select the 2 "PickPoints" for the dimension.
Step 3) Select a "screen location" (NOT a PickPoint) to lay the text down.
http://www.2020softwaresolutions.com/images/support104.jpg
This is what it will look like once the dimension is completed:
http://www.2020softwaresolutions.com/images/support123.gif
Use the "Shade Mode" command icon for a great picture for printing or saving off for your web site:
http://www.2020softwaresolutions.com/images/support124.gif