fabcam
03-07-2007, 04:14 PM
Here is a quick picture of the differences between apex and tangent:
http://www.2020softwaresolutions.com/se/ez-3d_1.jpg
All 3 of the parts are exactly the same. The first one shows using 2 apex dimensions, the second shows using 2 tangent dimensions and the last has 1 apex and 1 tangent dimension. In our case the CLR is 3.5
http://www.2020softwaresolutions.com/se/ez-3d_1.jpg
All 3 of the parts are exactly the same. The first one shows using 2 apex dimensions, the second shows using 2 tangent dimensions and the last has 1 apex and 1 tangent dimension. In our case the CLR is 3.5