Bend-Tech EZ in-depth
Bend-Tech EZ in-depth
|
|
|
Select the Custom Part icon to use a custom 2D part.
After selecting the icon you have the opportunity to select the number of bends.
A custom 2d part can have up to 6 bends.
We create a part by starting at one end and entering in the lengths and angles for each bend. The dim type can be Apex or Tangent. Apex is the intersection of the 2 tube sides as if they have a zero radius and zero diameter (basically 2 lines).
This part shows the 180 degree bend using a tangent dimension and the 90 degree bend uses an apex dimensions. Note: a positive angle strokes counter clockwise and a negative angle dimension strokes clockwise.
All 3 of the parts are exactly the same. The first one shows using 2 apex dimensions, the second shows using 2 tangent dimensions and the last has 1 apex and 1 tangent dimension. In our case the CLR is 3.5 |
|
Send mail to webmaster@2020softwaresolutions.com with
questions or comments about this web site.
|
