Bend-Tech EZ  in-depth

There are dozens of pre-defined templates to choose from.  Most templates allow for center, outside and inside dimensions.  While scrolling down the list of templates, they graphically show up in the window on the right.

The templates are read in from a secondary file.  This allows us to periodically create new templates and have them available for download.

After selecting you desired template you are asked for the material and the proper tool.  Under the options pull down you can set up a default tool and material.

After the tooling and material is selected a graphical design view appears waiting for input.  As your values are entered, the solid model is automatically created and your bending results and cut lengths are instantly calculated.

This picture shows the values have been entered.  Notice how the input values can be fractions using the templates.  For this part our cut length is 130 1/2 and our bend locations are 21 7/8, 38 7/16, 61 15/16 and 78 7/16.  The results window can be in fractions with definable tolerances from 1/4 to 1/32 or use decimals up to 3 places.

This is the same template with the horizontal leg dimension changed to 40.  Notice the locations and angles have changed in our results window.

Now the horizontal leg dimension has been changed to 54

Send mail to webmaster@2020softwaresolutions.com with questions or comments about this web site.
Copyright © 2005 2020 Software Solutions, Inc.
Last modified: March 06, 2005