Which Bend-Tech product is best for me?

must have SE if:

- your bender has a rotary index table

- some of your parts have more than one radius

- you receive XYZ data from your customers or engineering department

- need to convert between inches & millimeters

- you need decimal place accuracy for your bend angles or rotations

- have any parts over 10 bends

- you concerned about setup and production time.

- want to import or export dxf files*

should have SE if:

- your business depends on bending tube

- you have a bender that is worth more than $5000.00

- you bend tube almost everyday

- desire to have the software help with spring back compensation

must have a minimum of PRO if:

- want to design in assembly

- you desire fish-mouthing cutting profiles

- need to dimension you parts

- have any parts over 6 bends

should have a minimum of PRO if:

- you end up welding multiple pieces together

- don't have any other CAD design software tools

must have a minimum of EZ-3D if:

- want to find the bend rotation

- want to design in 3D

- need to flip the part between bends

should have a minimum of EZ-3D if:

- you don't line the bend mark with the exact location of where the bending starts... More--

- don't have any bending experience

what is EZ good for?

- you are going to bend less than 20 parts in a year.

- most of your bending is 90 degree with no rotation

- EZ is typically sold as an OEM product for hobbyist style benders.  

-The majority of customers who purchase EZ will upgrade in a very short period of time.